NYLON COVER Water repellent and heat resistant Elasticized hems for a snug no-blow-away fit For street bikes sport bikes and larger models Lightweight easy to handle and very affordable. Slips on almost effortlessly. Ventilated panels allow moisture and condensation to escape preventing damage to bike's finish. Reinforced grommets. Stores quickly and compactly in included carry bag. Cable and Lock: Use with or without cover to minimize risk of cycle theft. 31" plastic covered cable with lock and 2 keys.

POLYESTER COVER Water repellent and heat resistant Available in 4 sizes For 50cc to 1500cc large touring cycles Urethane coated to repel water better! Strong yet lightweight cover remains pliable in even coldest weather. Metalized lining and soft no-scratch windshield lining. Vent minimizes damaging condensation buildup. Elasticized hems hold cover in place. Reinforced grommets. Stores quickly in included carry bag. Cable and Lock: Use with or without cover to minimize risk of cycle theft. 31" plastic covered cable with lock and 2 keys. Full Dress: With fairing windshield crash bars mirrors travel chest and small seat back or sissy bar. Semi Full Dress: With or without fairing windshield mirrors saddlebags and small seat back or sissy bar. Half Dress: With or without fairing windshield mirrors and saddlebags.

WEATHERSHIELD™ PERFORMANCE MOTORCYCLE COVER Revolutionary breakthrough—provides maximum protection plus is easy to handle and store! Ultra-soft fabric interior eliminates need for flannel windshield panel For touring cycles cruisers and sport bikes Completely shields cycle from rain snow and dust. Virtually dustproof. Sheds water like a duck…rain simply beads up and rolls off…shakes dry in minutes. Safely covers hot pipes! Folded it takes up less than half the space of conventional multilayer fabrics. Compact and lightweight—stores easily and can be washed and dried in home machines. Safe no need to wait for hot pipes and engine to cool down…no need for metallized panels or heat shields. Nextec® fabric is the result of a patented new process. Durable breathable protective polymers are precisely placed inside woven fabric then the fabric is encapsulated within an ultra-thin film. Better than the best coated or laminated covers because the protection is throughout the fabric not just on one side. Fabric is breathable—heat and condensation easily escape. UV resistant. Overlapped double-stitched seams. Sewn-in neoprene elastic in front and rear hems for sung fit. Nonscratch tie-down grommets.

MECHANICAL 120 MPH SPEEDOMETER Odometer records up to 999999.9 miles; trip odometer records up to 999.9 miles Illuminated 3-3/4" diam. matte black face with easy-to-read white numerals and orange pointer For all American vehicles Chromed bezel. Requires 3-3/8" diam. mounting hole approx. 3-1/4"D clearance. Includes in-dash mounting bracket. Uses existing cables. 0.104 sq. drive and 5/8-18 internal thread 1:1 ratio.

CHROMED SPEEDOMETER AND TACHOMETER Illuminated 2-1/4" diam. black face with white numerals and indicator needle Glistening 2-5/8" diam. housing For Honda Kawasaki Suzuki and Yamaha cycles Mechanical-drive units for custom choppers cafe racers or replacement for damaged or defective original equipment. Easy to install. Clamp onto handlebars with original drive cables. Chromed mounting brackets clamps and vibration-absorbing rubber insulation included. Speedometer reads 0-160 mph. Tachometer reads 0-12000 rpm.

TIRE COVER Water-resistant material with UV inhibitors Silk-screened graphic Fits 26-3/4" to 29" diam. tires. Since its origins 95 years ago the Harley-Davidson® mystique has grown in stature and fame. Today Harley-Davidson® is legendary. Be a part of this legend with this officially licensed Harley-Davidson® tire cover. Water-resistant material with UV inhibitors. Silk-screened graphic.

DASH PANEL COVER Chrome-plated steel cover replaces old or damaged dash and adds new life and sparkle! Use with existing original speedometer and mounting plate For Harley-Davidson cycles with Fat Bob® tank Includes 3 lenses (2 red one blue) and trim rubber.

CHROME-PLATED AUXILIARY MARKER LIGHTS Choose red or amber lens Replacement bulbs (box of 10) sold separately Extra styling and more visibility! Lights feature chromed metal bullet housing; slotted metal grille with 1/4" wraparound side rim that completely covers lens; chromed 3/8" high pedestal mount with hollow pigtail wire-concealing threaded mounting stud with nut. 12-volt dual-filament bulb lets you wire light as a marker or running light or as an auxiliary turn signal or auxiliary brake light. Approx. 2-1/4"D x 2-1/4" diam.

MOTORCYCLE/ATV HYDRAULIC LIFT 1500-lb. capacity Heavy-duty 4-ton hydraulic jack safely lifts almost any cycle or ATV Professional-quality lift for home or shop Simplifies bike repairs. Effortless maneuvering¿jack rolls easily anywhere on 4 casters. 14-1/2"W square load-bearing surface with rubber pads safely holds bike. Bike can be strapped down for added security (straps not included). 6 locking height positions: 5" minimum 17" maximum. Heavy-duty steel with tough powder-coat finish. High-load steel casters. Anti-slip foot pedal. Collapses for compact storage. Jack handle included. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.

SELF-LUBRICATING 530 MOTORCYCLE CHAIN Specially compressed sintered bushings are impregnated with oil which "flows" from the bushings as chain operates Available in chain size #530 only (usually found on master link) Custom fit for motorcycles Provides all the oil and lubrication chain needs. Master link included. How To Determine Number of Chain Links: There's an easy way to find out using any of the 3 methods below. For greatest accuracy it's best to start counting at the master connecting link. Marking that link will prevent double counting. Remember the number of links will always be an even number. Count all rollers. The number of rollers equals number of links. Count all pins on one side of chain. The number of pins equals number of links. Starting with the master connecting link (counted as "1") count all outer side plates on one side of chain. Double that number equals the number of links (e.g. 48 outer side plates equals 96 chain links).

CLASSIC-STYLE ELECTRIC HORN Chromed grille and vintage styling Choose 6-volt or 12-volt horn For Harley-Davidson and other cycles Looks like the horn used on popular Harley's in the '40s and '50s! A must for restoration or customization. Large approx. 5-1/4" diam. chrome-plated metal grille on black-painted metal housing. Replaces OEM #69001-42 or can be used on any cycle (universal mounting bracket included). Note: Check available space before ordering.

LOADING RAMPS FOR CYCLES Tough black epoxy finish. Choose heavy-duty or standard-duty heavy-gauge steel ramps. 15 grated holes improve traction. Approx. 2"H sides prevent cycle from slipping off. Heavy-duty: Supports any cycle up to 950 lbs. Approx. 6" inside width 72"L. Standard-duty: Supports cycles up to 650 lbs. Approx. 5-1/2" inside width 68"L.

ALUMINUM LOADING RAMP 1000-lb. capacity Folds into a compact (approx. 4-1/2" x 12" x 47-1/2") package Designed for easy loading or unloading of cycle wheelbarrow or other cargo onto pickup bed or trailer. Order 2 ramps for 4-wheel ATV. Ramp is strong lightweight (approx. 25 lbs.) and easy to handle. Approx. 12"W x 84"L fully extended (without stabilizing fingers) and has 1" x 2" extruded high-alloy structural aluminum side and center rails with strong welded-on 1" x 2" cross members. Cross members are ridged for better traction and reduced slippage. Unique center hinge is reinforced for greater strength and angled upward to help prevent bowing under heavy loads. Approx. 4"L welded-on no-mar stabilizing fingers fit on tailgate. Steel cable (included) secures to bumper to help prevent separation. Latch holds folded ramp closed for trouble-free transport (carry handle included) and storage. Cannot be shipped express. Save $10 on a Pair of Ramps! 2000-lb. total capacity. Cannot be shipped express.